Roots blower after installation, inspection work is very important, every day to check the blower, can effectively prevent the occurrence of failure, the following I summarize for you, about the key work content of inspection.

1. Blower temperature

The temperature inspection part of the blower has the casing, bearing, import and export other temperatures, high temperature has a greater impact on the blower, so the daily inspection is a necessary work, if our blower has a cooling water pipe, check the temperature of the cooling water pipe, the temperature can not be too high.

2.Pressure gauge check

The pressure gauge of the blower is also the content that needs to be checked every day, the pressure meter value of the blower should be consistent with the pressure on the nameplate, and must not exceed the nameplate pressure, which will cause the blower overpressure, and the damage to the machine is serious.

3. Noise check

When the Roots blower is running, there is generally wind noise, and listening to the noise of the blower is mainly to avoid the existence of mechanical friction, which may be caused by the existence of mechanical friction inside the blower and the internal failure.

4. Vibration inspection

The abnormal vibration of the blower needs to be monitored, the blower can not be reflected in the noise, it may be detected in the vibration, and the abnormal vibration will also reflect the fault. Therefore, in the early stage of procurement, we should prepare various detection equipment, deliver it to the responsible personnel, conduct regular inspection and make a record.

5. Other maintenance work

In addition to checking these regularly every day, we also need to regularly maintain other components of the blower, if you do not have a description of the maintenance cycle, you can see our Maintenance instruction manual.