News

You are here:Home > News
What should we pay attention to when installing mvr steam compressor?

In the daily installation of steam compressors, it is inevitable to encounter some common operating problems, today for you to share some precautions for the installation of steam compressors.

1. The steam compressor should be installed in a solid place on the ground, and sufficient space should be reserved around it for easy viewing, protection and maintenance.

2. The base surface should be kept under the steam compressor base. It is recommended to cushion the four corners of the base with damping rubber or bolt casting device to ensure the smooth operation of steam compressor and small oscillation.

3. The connection pipe between the steam compressor and the system should be sealed firmly. Small Roots blower can be connected by vacuum hose. The pipe diameter is not less than the suction diameter of Roots blower, the pipe length is short, and the elbow is less. (When welding the pipeline, the welding slag in the pipeline should be removed, and the welding slag is strictly prohibited from entering the vacuum pump room.)

4. In the connecting pipe, the user can install the valve and vacuum gauge above the inlet of the Roots blower to check the ultimate pressure of the Roots blower at any time.

5. Connect the power supply according to the motor label rules, install the ground cable and the corresponding standard fuse and thermal relay.

6. When powering on the test run, it must be confirmed that the rotation direction of the vacuum pump conforms to the specified direction before it can be put into use.

7. Connect cooling water according to regulations.

8. If the solenoid valve is installed at the steam compressor outlet, the valve and the steam compressor should operate at the same time.

9. When the gas discharged from the steam compressor affects the working environment, a pipeline can be installed at the exhaust port to lead away or an oil mist filter can be installed.

If you are interested in our mvr steam compressor, please contact us right now.